Energy pictogram

Energy

Logo of Capstan-winch on trailer
Capstan-winch on trailer Capstan-winch on trailer

Capstan-winch on trailer

Capstan-winch on trailer

The capstan-winches on trailers provide you extra flexibility to keep you on the road while enjoying all capstan winch benefits.

Discover our range of cable pulling winches.

Max pulling force: 20 - 30 kN (2000-3000 kg).

The trailer-mounted capstan winch is designed for laying underground telecommunication and power cables in pre-installed ducts or open trenches as well as for subducting operations.

Our new 3-ton electric capstan winch, called E-Winch, is particularly relevant. It's powered by two high-powered batteries allowing you to work for more than four hours without interruption. It can be recharged from the mains, generator or car charging points, allowing you to continue laying cables without interruption.

Its compact design and light weight allow all our models to be used in tight spaces and its dual capstan system provides pull at constant speed and force.

The electric drive of our new 3-ton electric capstan winch E-Winch allows it to be used in closed and confined environments. Thanks to its electric motorisation on batteries, it avoids the complicated installation of ducts to divert the greenhouse effect exhaust gases. Finally, you will benefit from an unrivalled increased silence allowing you to work at night or even in town.

The cable of all our models is automatically paid in and stored by means of a swivelling pulley at a fixed point. This design allows a low-tension winding, regardless of the pulling force and guarantees a stable and constant load on the cable to increase its lifespan.

During the pulling operation, its adjustable limiter automatically stops the winch in case of overload. Its reverse gear allows the cable to be safely and easily unwound.

Our trailers are equipped with a suspension axle and depending on the model with a removable polyester hood or with an overhanging protective canvas.

Furthermore, our capstan-winches, thanks to the additional product "electronic assistant MP 50", have the possibility to monitor and record the most important values during installation and to supervise the pulling force.

Available in 9 versions.

Discover our new 3-ton electric capstan winch E-Winch:

Characteristics

Standard version Capstan-winch
Type TL 3022 DRE 1050/9
Rope dia. [mm] 9
Max. rope length [m] 1050 (Ø 9 mm)
Drive unit Electric
Type of engine / motor Electric
Engine / motor, max. power [kW] 9
Engine / motor, max. RPM [min-1] 3000
Max. pulling force in 1st gear [daN] 3000
Max. pulling force in 2nd gear [daN] 500
Speed of pay-in rope in 1st gear [m/min] 0 - 20
Speed of pay-in rope in 2nd gear [m/min] 0 - 75
Speed of pay-out rope [m/min] 0 - 75
Remote Monitoring digital service yes
Length, handlebar in high position [mm] 4054
Width [mm] 1702
Height, wheels in high position [mm] 1547
Weight of winch without rope [kg] 905
Standard version Capstan-winch
Type TL 3022 DRE 1050/9
Rope dia. [mm] 9
Max. rope length [m] 1050 (Ø 9 mm)
Drive unit Electric
Type of engine / motor Electric
Engine / motor, max. power [kW] 9
Engine / motor, max. RPM [min-1] 3000
Max. pulling force in 1st gear [daN] 3000
Max. pulling force in 2nd gear [daN] 500
Speed of pay-in rope in 1st gear [m/min] 0 - 20
Speed of pay-in rope in 2nd gear [m/min] 0 - 75
Speed of pay-out rope [m/min] 0 - 75
Remote Monitoring digital service yes
Length, handlebar in high position [mm] 4054
Width [mm] 1702
Height, wheels in high position [mm] 1547
Weight of winch without rope [kg] 905